Gardena MultiControl duo Operator's Manual

Problem Possible Cause Remedy
Water Control does not
close
Minimum quantity of water
drawn is less than 20 l/h.
v Connect more drip heads.
Symbol direct sensor
control
is flashing
Sensor is not correctly
connected or not registered.
v Check connection cable and
sensor, or activate sensor.
Sensor 1 and / or Sensor 2
is flashing
Sensor is defective. v Check Connection Cable and
sensor or deactivate sensor.
NOTE: For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.
9. ACCESSORIES
GARDENA Soil Moisture Sensor Art. 1188
GARDENA Anti-theft device Art. 1815-00.791.00
from GARDENA Service
GARDENA Adapter cable To connect older GARDENA sensors. Art. 1189-00.600.45
GARDENA Cable Adapter For the simultaneous connection
of 2 sensors to a connector.
from GARDENA Service
8. TECHNICAL DATA
Water Control Unit Value
(Art. 1874)
Number of controlled valves 2
Min. / max. operating pressure bar 0.5 / 12
Flow medium Clear fresh water
Max. liquid temperature °C 40
Temperature area °C 5 to 60
Number of program-controlled
watering cycles per valve and
day
3 x (every 8 hrs.), 2 x (every 12 hrs.), 1 x (every 24 hrs.)
Number of program-controlled
watering cycles per valve and
week
Every day, every 2, 3 or 7 days;
or individual selection of weekdays
Watering duration 1 min. to 3 hours 59 min.
Battery required
1 × 9V alkaline manganese alkaline battery
type IEC 6LR61
Operating time of the battery approx. 1 year
21
EN

Gardena MultiControl duo Specifications

General

Power Source	Battery
Display	LCD
Manual Operation	Yes
Weatherproof	Yes
Number of Outlets	2
Battery Type	9V alkaline
Operating Pressure	0.5 to 12 bar
Tap Connector	3/4"
Type	Water Timer
Battery Life	Approximately 1 year
Programs	Independent programming for each outlet