Gardena T 1030 card - Connecting your Water Timer; Connecting the Water Timer to taps with a 33.3 mm (G1) thread; Connecting the Water Timer to taps with a 26.5 mm (G 3;4);23 mm (G 5;8″);21 mm (G 1;2) thread

7
GB
The functional safety of the water timer depends on the capability
of the batteries.
If you change the batteries the program is not saved. You must
reprogram the Water Timer (see 5. Operation).
The Water Timer is fitted with a sleeve nut
4
for taps with a
33.3 mm (G1” ) thread. The adapters supplied
5
allows the
Water Timer to be connected to taps with a 26.5 mm(G 3/4” )/
23 mm (G 5/8” ) / 21 mm (G 1/2” ) thread.
Connecting the Water Timer to taps with a 33.3 mm (G1” )
thread:
1. Screw the sleeve nut
4
of the Water Timer onto the thread
of the tap by hand (do not use pliers).
2. Screw the threaded tap connector
6
onto the Water Timer.
Connecting the Water Timer to taps with a 26.5 mm (G 3/4” )/
23 mm (G 5/8” ) / 21 mm (G 1/2” ) thread:
1. Screw the adapter
5
onto the tap by hand (do not use pliers).
2. Screw the sleeve nut
4
of the Water Timer onto the thread
of the adapter
5
by hand (do not use pliers).
3. Screw the threaded tap connector
6
onto the Water Timer.
Connecting your Water Timer:
6
4 5