Select time format which will be
shown on the screen and each capture.
12h - AM/PM
Select On to assign a 4-character long
in the form of Capital A-Z, 0-9 to
record the location in the photos (e.g.
A123 for Yellow Stone Park). This
helps multi-camera users identify the
location when reviewing the photos.
Select On to show date, time,
temperature, moon phase on each
capture.
Selecting On option will cause the
oldest files to be overwritten with new
captures when the SD card reaches its
capacity. With Off option selected, the
camera will stop capturing images
once the SD card reaches capacity.
Select On if you only want the camera
to work within a specified time period
every day. For instance, if the starting
time is set at 18:35 and the ending time
at 8:25, the camera will function from
18:35 the current day to 8:25 the next
day. Outside the time period the
camera will not be triggered.
Note: This option is ONLY valid if
Mode is set as "Motion Detection" .
Set up a 4-digit password to protect
your camera from unauthorized users.
If the code is lost, you can contact
customer support to reset the
To Next Page
Loading...
