Need help?Do you have a question about the GardePro E6 and is the answer not in the manual?
General| Connectivity | Wi-Fi |
|---|---|
| Power Source | 8 AA batteries |
| IR Flash Range | 65ft |
| Waterproof | IP66 |
| Detection Range | 65ft |
| Battery Life | Up to 6 months |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Night Vision | 850nm IR |
| Storage | Up to 128GB SD card |
| Image Sensor | CMOS |
| Video Resolution | 1296P |
Details on required battery type and proper installation for optimal performance.
Specifies compatible SD card types, capacity, and formatting recommendations.
Guidance on establishing a Wi-Fi connection with the GardePro mobile app.
Overview of the GardePro E6 as a new generation Wi-Fi trail camera.
Lists the primary capabilities and specifications of the trail camera.
Instructions for correctly inserting AA batteries into the camera's battery compartment.
Procedure for inserting the SD card into the camera slot for data storage.
Details on the camera's powered-off state for safety and device maintenance.
Instructions for operating the camera with its screen active for settings adjustment.
Explanation of the standby mode for motion detection or time-lapse capture.
Guide on acquiring and installing the necessary mobile application.
Steps to activate mobile phone's Wi-Fi and Bluetooth for app pairing.
Process for adding the trail camera to the mobile application.
Steps to find and connect the camera to the mobile app via Wi-Fi.
Overview of the main features and sections within the GardePro mobile app.
Key considerations and troubleshooting for maintaining a stable Wi-Fi connection.
Guidance on securely attaching the camera to trees or other surfaces.
Procedure to test and verify the camera's motion detection range and angle.
Instructions on how to begin using the camera in its various operational modes.
To Next Page
