Need help?Do you have a question about the GardePro A3S and is the answer not in the manual?
General| Trigger Speed | 0.1s |
|---|---|
| Power Supply | 8 AA batteries |
| Waterproof | IP66 |
| Battery Life | Up to 8 months |
| Detection Range | 65ft |
| IR Flash Range | 65ft (20m) |
| Photo Resolution | 12MP |
| Flash Type | No Glow |
| Operating Temperature | -4°F to 140°F |
| Video Resolution | 1080p HD |
Details the camera's functionality and purpose.
Highlights the key capabilities and technologies of the camera.
Step-by-step guide for inserting batteries into the camera.
Instructions for correctly inserting the memory card.
Describes the safe mode for maintenance and storage.
Details the active surveillance mode and automatic capture.
Covers accessing menus for settings and downloading files.
Details secondary functions of keys in SET mode.
Selects the camera's operating mode (Motion Detection, Time Lapse, Hybrid).
Selects whether still photos or video clips are taken.
Selects desired resolution for still photos.
Selects the number of photos taken in sequence per trigger.
Selects video resolution (pixels per frame).
Selects video recording length.
Controls whether video recordings include audio.
Specifies the file format for video recordings (MP4, MOV).
Adjusts image brightness for daytime and nighttime conditions.
Sets the wait time before the camera responds to subsequent triggers.
Adjusts the sensitivity of the motion sensor based on ambient temperature.
Activates side sensors for faster trigger speeds and wider detection.
Helps aim the camera at the target area by testing motion detection.
Sets the interval for automatic photo/video capture in Time Lapse mode.
Sets specific working time periods for Time Lapse or Hybrid modes.
Allows setting the current date and time for imprinting on captures.
Selects the display format for the date on screen and captures.
Selects the display format for the time on screen and captures.
Assigns a 4-character name to record the camera's location.
Selects whether to show date, time, temperature, moon phase on captures.
Manages SD card space by overwriting oldest files when full.
Sets specific daily periods for the camera to be active.
Sets a 4-digit password to protect the camera from unauthorized access.
Deletes all files on the SD card to prepare it for use.
Restores all settings to their default manufacturer values.
Displays the current software version of the camera.
Guidelines for securely attaching the camera to a tree or tripod.
Procedure to test the camera's detection range and field of view.
Instructions for activating the camera in different working modes.
To Next Page
