GardePro A3S - SWITCHING ON THE CAMERA

15
This helps multi-camera users
identify the location when reviewing
the photos.
Info Strip
On
Off
Select On to show date, time,
temperature, moon phase on each
capture.
Loop
Recording
On
Off
Selecting On option will cause the
oldest files to be overwritten with
new captures when the SD card
reaches its capacity. With Off option
selected, the camera will stop
capturing images once the SD card
reaches capacity.
Operation
Hours
On
Off
Select On if you only want the
camera to work within a specified
time period every day. For instance,
if the starting time is set at 18:35 and
the ending time at 8:25, the camera
will function from 18:35 the current
day to 8:25 the next day. Outside the
time period the camera will not be
triggered.
Note: This option is ONLY valid if
Mode is set as "Motion Detection" .
Password
On
Off
Set up a 4-digit password to protect
your camera from unauthorized
users. If the code is lost, you can
contact customer support to reset the
password.
Format SD
Card
Yes
No
All files will be deleted after
formatting the SD card. We highly
recommend you to format the SD
card if it has been used previously in