to capture images. If the Mode is set as "Time Lapse", there will
be no 30-second counting down, and the camera will be ready
to enter Time Lapse.
Once in the ON mode, no manual controls are needed or
possible (the control keys have no effect). The camera will take
photos or videos automatically (according to its current
parameter settings).
You can either move the power switch directly from OFF to
ON mode, or stop at the SET position first to change one or
more settings, then move the switch to ON after you have
finished doing so.
7.3. SET MODE
In the SET mode you can check and change the settings of the
camera with the help of its built-in screen. These settings, found
in the menu by pressing MENU key, let you change the photo
or video resolution, interval between photos, switch the time
imprint on, etc. (See more in Section 8 ADVANCED
SETTINGS).
Moving the power switch to the SET position will turn on the
screen display, you will see an information screen that shows
how many images have been taken, the battery level, camera or
video mode, etc.
Attention please: In SET mode, the camera will automatically
enter ON mode if there is no operation (key pressing) within 5
minutes. Then the camera will perform as your settings in the
menu.
In the SET mode, you can connect the camera to a computer's
USB port to download your images.
Shortcut Keys/Functions
To Next Page
Loading...
