Need help?Do you have a question about the GardePro E8P and is the answer not in the manual?
General| IR Flash Range | 65ft |
|---|---|
| IR LEDs | 36 |
| Recovery Time | 0.5s |
| Time Lapse | Yes |
| Password Protection | Yes |
| Power Supply | 8 AA batteries |
| Waterproof | IP66 |
| Battery Life | Up to 6 months |
| Detection Range | 65ft |
| Photo Resolution | 16MP |
| Video Resolution | 1080P |
| PIR Sensitivity | High / Low |
| Operation Mode | Photo, Video, Photo & Video |
| Flash Type | Infrared |
Information about battery usage and safety requirements for the trail camera.
Details on SD card requirements and built-in memory for different models.
Guidance on connecting the camera via the mobile app for optimal performance.
Overview of the GardePro E8P series Wi-Fi trail cameras and their core technology.
Lists the key features and specifications of the GardePro trail camera.
Instructions on how to correctly install the battery pack into the camera.
Detailed guide on inserting and removing the SD card for compatible models.
Describes the safe mode for maintenance, transport, or storage.
Details how to power on the camera and access its menu and settings.
Explains how to activate the camera for motion detection or time lapse capture.
Guide to downloading the necessary mobile application for camera control.
Steps to enable Wi-Fi and Bluetooth on the mobile device for connection.
Process of adding the trail camera to the GardePro mobile app.
How to find and connect to the camera's Wi-Fi network within the app.
Overview of the main features and navigation within the GardePro mobile app.
Crucial information and tips regarding the Wi-Fi connection and app usage.
Instructions on physically mounting the camera to a tree or other support.
How to test the camera's motion detection range and angles.
Steps to start the camera in its different operational modes.
To Next Page
