6. USING THE CAMERA
Once you've prepared your camera by properly installing
battery and an SD card (for the E8P, E8PCF and E8PWF
models), you could simply take it outside, strap it to a tree (or
not - according to your application scenario), switch it ON,
press START button and leave-and you might get some great
photos that are exactly what you wanted. However, we highly
recommend that you first spend some additional time indoors
with this manual and your camera until you know a bit more
about what those control keys do. If nothing else, you'll
probably want to at least set the date and time so the camera
will imprint them (or not-it's your option) on your photos as
they are taken, learn how to set the camera to shoot video clips
instead of still photos if you like, and read some tips about
mounting it on a tree.
7. THE OFF, ON, AND SURVEILLANCE MODES
The camera has three basic operational modes:
OFF mode: Power switch in the OFF position (The camera
is powered off).
ON mode: Power switch in the ON position (The camera is
powered on and its screen is on).
SURVEILLANCE mode: When the camera is powered on,
press START button to enter the surveillance mode. When
the screen is off, the camera enters standby and will perform
according to your settings.
App & Wi-Fi Connection:
You can use the app to connect the camera when the camera is
operating in the ON or SURVEILLANCE mode.
To Next Page
Loading...
