As mentioned earlier in "Parts & Controls", the keypads have
secondary, "shortcut" functions when the camera is switched to
SET mode:
Press the UP key to quickly set the camera to shoot video
clips.
Press the DOWN key to quickly set the camera to take still
photos.
Press the RIGHT key to manually trigger the shutter. This is
useful for testing the camera. The "number of images taken"
counter on the top right of the screen will increase by one.
Press the OK key to playback. Then press UP or DOWN
key to navigate the history photo or video if you want.
Finally press the OK key to exit playback.
8. ADVANCED SETTINGS
The trail camera comes with preset manufacturer settings. You
can change the settings to meet your requirements. Please make
sure that the camera is in the SET mode. Once the camera
screen is on, press MENU key to enter/exit the menu. Press the
UP/DOWN key to move the marker, Press the LEFT/RIGHT
key to change the setting, and press the OK key to confirm the
change. Always remember to press the OK to save the change.
Otherwise you will lose your new setting.
Motion
Detection,
Time
Lapse,
Hybrid
In Motion Detection mode, the
camera will take photos or videos
once triggered. In Time Lapse mode,
the camera will take photos or videos
periodically according to your preset
To Next Page
Loading...
