EasyManua.ls Logo

GardePro A3S - Format SD Card; Factory Reset; Version; MOUNTING AND POSITIONING THE CAMERA

GardePro A3S
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
more, and the Medium/Low setting is
helpful in cold weather.
Note: this option is invalid if Mode is
set as "Time Lapse".
Side
Motion
Sensors
On
Off
Selecting On will activate the side
motion sensors. It brings faster
trigger speeds and helps capture fast
moving animals. When any of the
two side motion sensors detects a
motion event, the camera will be
pre-activated. While the animal
enters the detection area of the center
motion sensor, the camera will start
taking photos or videos. Select Off to
save batteries power.
Motion
Test
This feature helps you aim the
camera at your target area. Please
refer to the details in Section 9.2.
Timelapse
Interval
First Shot
Time:
hh:mm
Set the earliest shot time after Time
Lapse or Hybrid mode is enabled. If
you would like to get photos earlier,
it is recommended to set it later than
the current time.
Interval:
optional
from 3s to
24h
Set time lapse interval. It takes effect
ONLY when Mode is set as Time
Lapse or Hybrid, the camera will
automatically take photos/videos
according to the set interval,
regardless of whether the PIR sensor
has detected any game. This is
helpful when observing cold-blooded

Related product manuals