be working with videos in MOV
format.
Daytime:
Off/Low/
Medium/
High
Night:
Off/Low/
Medium/
High
Divided into daytime and night, from
off, low to high, the degree of
overexposure suppression is
gradually increasing. The default
settings can be used for most scenes.
However, the settings can be
fine-tuned for different camera
installation positions. If you think the
image is dark, please lower the level,
if overexposed, please increase the
level. In order to obtain the best
image quality, please try to eliminate
obstacles in front of the camera.
10 seconds,
optional
from 0s to
60m
Select the shortest length of time that
the camera will wait until it responds
to any subsequent triggers from the
PIR sensor after a game is first
detected. During the selected
interval, the camera will not take
pictures/videos. This prevents the SD
card from filling up with too many
redundant images. 0 means capture
as fast as possible.
Note: this option is invalid if Mode is
set as "Time Lapse".
Select the sensitivity of the PIR
sensor. Temperature affects the
sensitivity. The High setting is
suitable when the ambient
temperature is warm or you want to
capture distant object or capture
To Next Page
Loading...
