9. ADVANCED SETTINGS
The trail camera comes with preset manufacturer settings. You
can change the settings to meet your requirements. Once the
camera screen is on, press MENU key to enter/exit the menu.
Press the UP/DOWN key to move the marker, Press the
LEFT/RIGHT key to change the setting, and press the OK
key to confirm the change. Always remember to press the OK
to save the change. Otherwise, you will lose your new setting.
Table 2 – Camera Settings
Motion
Detection
,
Time
Lapse,
Hybrid
In Motion Detection mode, the
camera will take photos or videos once
triggered. In Time Lapse mode, the
camera will take photos or videos
periodically according to your preset
"Timelapse Interval" parameter.
Hybrid mode includes both above.
Select whether still photos or video
clips are taken.
Select desired resolution for still
photos. Higher resolution produces
better quality photos, but creates larger
files that take more of the SD card
capacity. Larger files require longer
time to write to the SD card, which
will slightly slow the shutter speed.
To Next Page
Loading...
