8
Figure 6: Loading the Batteries
5.2. Inserting the SD Card
Insert the SD card (with the camera powered off), before
beginning to operate the camera. Don't insert or remove the SD
card when the camera is powered on or in the surveillance
mode. (Figure 7).
Figure 7: Inserting the SD Card
The following describes how to insert and remove the SD card:
Insert the SD card into the card slot with its label side
upwards. A "click" sound indicates that the card is installed
successfully. If the wrong side of the card is facing up, you
will not be able to insert it without force, there is only one
correct way to insert cards. If the SD card is not installed
correctly, the device will not display an SD card icon on the
To Next Page
Loading...
