Garmin ADS-B User Manual

Elliott Aviation Technical Products Development, Inc. Report No.: ICA-3832-560
6601 74
th
Ave Building A Revision: IR
Milan, IL 61264 Dated 01/23/2018
1 of 21
Instructions for Continued Airworthiness For Garmin ADS-B System Installation
Instructions for Continued Airworthiness
For
Garmin ADS-B Out System Installation
(Type Certificate A22CE)
© 2017 ELLIOTT AVIATION TECHNICAL PRODUCTS DEVELOPMENT, INC.
Elliott Aviation Technical Products Development, Inc. reserves the copyright of all information and illustrations in this publication which
is provided in confidence and which may not be used for any purpose other than for which it was originally supplied. The publication
may not be reproduced in part or in whole without the consent in writing of Elliott Aviation Technical Products Development, Inc.
This stamp providesauthorization of
the use of FAA STC # ST04272CH to the
following aircraft Textron Aviation
model 560XL S/N 560-5272.

Garmin ADS-B Specifications

General

Brand	Garmin
Model	ADS-B
Category	Marine Radio
Language	English

Summary

Chapter 1 Introduction

1.1 Scope/Purpose/Applicability/Distribution

Defines the scope, purpose, applicability, and distribution of the ICA for the Garmin ADS-B System.

1.2 System Description

1.8 Precautions

Chapter 2 Maintenance Instructions and Schedules

2.1 Mandatory Replacements

2.2 Recurring Maintenance

2.3 Setup and Configuration in Service

Guides the setup and configuration process for the Garmin GDL 88 and GTX 3000 systems.

2.3.1 Garmin GDL 88 (Removal & Installation Only)

Provides steps for confirming GDL 88 part number and obtaining configuration instructions.

2.3.2 GTX 3000 Transponder (Removal & Installation Only)

Details confirming GTX 3000 part number and obtaining configuration instructions.

2.3.3 GTX 3000 "N" Number Registration Change

2.4 GTX 3000 / GDL 88 / Shadin AMC Troubleshooting

Provides a troubleshooting guide for common issues with the GTX 3000, GDL 88, and Shadin AMC.

Chapter 10 Airworthiness Limitations

10.1 Structural Inspection Requirements and Intervals

Specifies the threshold and recurring flight intervals for structural inspections of antenna installations.

10.2 Inspection Procedures

Outlines the steps and details for performing structural inspections on antenna installations.