Why does my Garmin Transceiver say 'No Position'?
The 'No Position' message on your Garmin Transceiver indicates that the GDL 88 is not receiving a GPS signal. Contact your dealer or customer service for technical assistance.
General| Type | ADS-B Receiver |
|---|---|
| Weight | 1.1 lbs (0.5 kg) |
| Power Supply | 10-32 VDC |
| Interface | RS-232, ARINC 429 |
| Operating Temperature | -20°C to +55°C |
| ADS-B | Yes |
| Weather Services | FIS-B |
| Frequency Band | 978 MHz |
| Power Requirements | 10-32 VDC |
| Compatibility | Garmin avionics |
Outlines the primary functions of the GDL 88 transceiver, including ADS-B transmission and reception.
Explains the ADS-B broadcast function and its data content, including position and identity.
Explains ADS-R, the rebroadcast of ADS-B data by ground stations to link different frequencies.
Describes TIS-B as a bridge between radar and ADS-B systems, providing ATC radar picture.
Details FIS-B for graphical weather information on UAT equipped aircraft.
Lists the data transmitted by the GDL 88 in ADS-B Out messages, including position and identity.
Lists the data received by the GDL 88 via UAT and 1090 MHz receivers, including ADS-B, ADS-R, TIS-B, and FIS-B.
Explains how the GDL 88 creates a fused traffic picture from various sources for situational awareness.
Details traffic display modes (AIRB, SURF) for situational awareness in different flight environments.
Describes interfacing the GDL 88 with TCAD/TAS/TCAS systems for traffic alerts and awareness.
Explains the CSA alerting algorithm for traffic situations, enhancing pilot awareness.
To Next Page
