87
GPSmap 60CS
Interfacing the GPSmap 60CS
The GPSmap is provided with interface connection to a PC using
either a serial port or USB connector cable. Connection to your computer
is necessary for downloading of detailed map from Garmin MapSource
Map Data CDs. You can also save routes, waypoints, and tracks from
the GPSmap 60CS to MapSource. Refer to the MapSource User’s Guide
provided with your MapSource CDs.
T
o connect to your computer using the USB connector:
1. Lift the USB protective cover from the back of the GPSmap
60CS and insert the smaller connector on the USB cable (pro-
vided with the unit) into the matching port.
2. Connect the remaining cable end to your PC USB port.
3. Set your GPSmap 60CS interface setting to GARMIN format.
(See page 56.
To connect to your computer using a Serial Port connector
:
1. Lift the Serial Port protective cover from the back of the
GPSmap 60CS and insert the round indexed connector on the
cable into the matching port.
2. Connect the remaining cable end to your PC Serial port or other
appropriate device.
3. Set your GPSmap 60CS interface setting to the appropriate
interface format. Refer to Interface Setup on page 56.
Appendices
Connecting the GPSmap 60CS
to a Computer
Universal Serial
Bus (USB) Port
Serial
Communications
Port
Lift Cover
Lift Cover
GPSmap 60CS Owner's Guide copy.indd 87 2/23/2004, 8:14:34 AM
To Next Page
Loading...
Need help?
General