Do you have a question about the Garmin GPSMAP 60Cx and is the answer not in the manual?
Outdoor (hiking, trekking) | Yes |
---|---|
Marine (chartplotters, sounders) | No |
Routes quantity | 50 |
Tracks quantity | 10000 |
Number of waypoints | 1000 |
Interface | serial, USB |
GPS receiver | SiRFstar III |
Supported protocols | NMEA 0183 |
Channels quantity | 12 channels |
GPS accuracy - position | 10 m |
GPS accuracy - velocity | 0.05 m/s |
Display resolution | 160 x 240 pixels |
Display size (HxV) (imperial) | 2.7 \ |
Internal memory type | - |
Battery type | AA |
Battery life (max) | 18 h |
Battery technology | Alkaline |
Number of batteries supported | 2 |
Bundled software | MapSource Trip & Waypoint Manager |
Operating temperature (T-T) | -15 - 70 °C |
Depth | 33 mm |
---|---|
Width | 61 mm |
Height | 155 mm |
Weight | 213 g |
Process for acquiring satellite signals for location fixing.
Covers marking, saving, and managing location points.
Methods for adding waypoints manually or from the map.
Modifying and removing saved waypoints.
Searching for locations like cities, addresses, and points of interest.
Detailed search methods for addresses, cities, and POIs.
Specific search functions for street data.
Recording and managing travel paths.
Configuring and managing track log recording.
Calculating track area, viewing profiles, and navigating saved tracks.
Planning and following multi-point navigation paths.
Step-by-step guide to building and following routes.
Details on following routes and previewing turns.
The primary interface for viewing cartography.
Central access point for device features and settings.
Adjusting zoom, orientation, and general map page options.
Detailed configuration for various map display elements.
Features for managing track logs.
Features for creating and managing routes.
Access point for device configuration settings.
Customizing how the device calculates and navigates routes.