Using Proximity Waypoints
Use the Proximity Waypoints Page to dene an alarm
circle around a stored waypoint location.
Proximity
icon
Empty line
Proximity
Alarms
check box
Radius
eld
To add a proximity waypoint:
1. Press MENU twice to open the Main Menu.
2. Highlight the Proximity icon, and press
ENTER to open the Proximity Waypoints Page.
3. Highlight an empty line, and press ENTER to
open the Find Menu.
4. Select a waypoint from the Waypoints List or from
any other group of map points, and press ENTER
to open the information page for the item.
5. With the Use button highlighted, press ENTER
to add the point to the list on the Proximity
Waypoints Page.
6. Use the ROCKER to highlight and adjust
the Radius eld if you want to enter a value
different than the default of 1 mile.
To select alarm tones and turn proximity
alarms on or off:
1. To select an alarm tone, select the Proximity
Alarm Tones button and press ENTER to
open the Proximity Alarm Tones Setup Page.
2. Highlight each alarm eld and press ENTER to
view the list of tones.
3. Select a tone from the list and press ENTER.
4. Activate the alarms by
placing a check in the box
at the bottom of the page.
Speed alerts are proximity
points obtained from
services provided by using
the optional POI Loader.
(see page 25)
GPSMAP 60Cx Owner’s Manual 15
bAsIc oPerAtIon > usIng ProxIMIty wAyPoInts
To Next Page
Loading...
Need help?
General
Weight and Dimensions
