Garmin GPSMAP 60Cx - Using Additional Map Data

To change a data eld contents display:
1. Press MENU to open the Map Page Options
Menu.
2. Highlight Change Data Fields, and press
ENTER. The rst data eld is highlighted.
3. Press ENTER to open the list of data eld
options.
Data eld
options
4. Use the ROCKER to select an option, and
press ENTER.
5. Use the ROCKER to move to the next eld,
and repeat steps 3 and 4.
For an explanation of each data eld option, see
page 76 in the Appendix.
Using Additional Map Data
Optional MapSource mapping data enhance the
versatility of your GPSMAP 60Cx. With MapSource
data disks, you can view listings of nearby
restaurants, lodging, shopping centers, attractions,
and entertainment, and you can retrieve addresses and
phone numbers for any listed location. With additional
BlueChart data, you can access marine information,
such as navaids, wrecks, obstructions, and anchorage
locations.
To view the data currently loaded on your GPSMAP
60Cx unit and microSD card, see page 45.
To review map information:
1. On the Map Page, press MENU.
2. Highlight Setup Map, and press ENTER.
3. Use the ROCKER to select the Map Setup-info
page. The list of maps stored on the microSD
card appears. A check mark indicates the map
is shown on the Map Page.
40 GPSMAP 60Cx Owner’s Manual
MAIn PAges > MAP PAge