Data Fields
You can show three or four data elds on the Compass
Page.
3 Data Fields 4 Data Fields
To show data elds on the Compass Page:
1. Press MENU to open the Compass Page
Options Menu.
2. Highlight Data Field, and press ENTER. The
Show submenu appears.
3. Select the number of data
elds you want to show on the
Compass Page and press ENTER.
To change data elds:
1. Press MENU to open the Compass Page
Options Menu.
2. Highlight Change Data Fields, and press
ENTER. The rst data eld is highlighted.
3. Press ENTER to select from a list of types of
navigation data to display in that eld.
4. Use the ROCKER to highlight the option you
want, and press ENTER to place it in the data
eld.
5. After making your selection and entry, use the
ROCKER to move to the next eld and repeat
the process.
6. Repeat Steps 3 through 5 to change remaining
data elds.
To restore data elds to default settings:
1. Press MENU to open the Compass Page
Options Menu.
2. Highlight Restore Defaults, and press ENTER
to return the page to factory settings.
GPSMAP 60Cx Owner’s Manual 51
MAIn PAges > coMPAss PAge
To Next Page
Loading...
