Clearing All Locked Channels on a SiriusXM Radio
Before you can clear all locked channels, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Clear All Locked.
2 Enter your passcode.
Restoring Default Parental Control Settings Values
This process deletes all the settings information you have entered. When you restore the parental control
settings to their default values, the passcode value is reset to 0000.
1 From the media menu, select Installation > Factory Defaults.
2 Select Yes.
Changing a Parental Passcode on a SiriusXM Radio
Before you can change the passcode, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Change PIN.
2 Enter your passcode and select Done.
3 Enter a new passcode.
4 Confirm the new passcode.
Setting the Device Name
1 From the media screen, select Options > Installation > Set Device Name.
2 Enter a device name.
3 Select Select or Done.
Updating the Media Player Software
You can update the software on compatible connected stereos and accessories.
See the stereo Owner's Manual at support.garmin.com for instructions on updating the software.
Audio Return Channel
The HDMI Audio Return Channel (ARC) enables you to play the audio from the chartplotter over the stereo
system speakers and play HDMI audio on the chartplotter using only one HDMI cable.
ARC eliminates the need to connect a separate audio cable from the chartplotter to the stereo. Typically, in
systems without ARC, to play the audio from the chartplotter over the stereo system speakers, you would need a
separate cable.
The HDMI version 1.4 cables support ARC. When planning your stereo installation, you should check whether
your devices support ARC. Most devices that support ARC have an ARC label on the HDMI connector that
supports ARC.
NOTE: The Fusion MS-AV750 stereo supports ARC. You should update the stereo to use ARC with the
chartplotter.
150 Media Player
To Next Page
Loading...
Need help?
General