Garmin Nuvi 710 Quick Start Manual

WARN I G: This product contains a non-user-replaceable lithium-ion battery. See the Important Safety and
Product Information guide in the product box for important battery safety information.
Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota
prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin
dashboard or friction mounting options should be used. See the Important Safety and Product Information
guide for more details.
Step 1: Mount the nuvi
1. Plug the vehicle power cable into the power connector
on the right side of the cradle.
2. Snap the cradle onto the suction cup arm.
3. Clean and dry your windshield and the suction cup
with a lint-free cloth. Remove the clear plastic from the
suction cup. Place the suction cup on the windshield.
4. Flip the lever back, toward the windshield.
5. Fit the bottom of your nUvi into the cradle.
6. Tilt the nUvi back until it snaps into place.
7. Plug the other end of the vehicle power cable into
a power outlet in your vehicle. Your unit should turn
on automatically if it is plugged in and your vehicle is
running.
8. If you are using a traffic receiver in Europe, secure the
traffic receiver's antenna to the windshield using the
suction cups. (The traffic receiver is included in some
nUvi 710, 750T, 760, and 770 packages.)
3
Cradle
Power cable

Garmin Nuvi 710 Specifications

General

Brand	Garmin
Model	Nuvi 710
Category	GPS
Language	English