Need help?Do you have a question about the Garmin STRIKER VIVID and is the answer not in the manual?
General| Display Type | WVGA color |
|---|---|
| GPS | Yes |
| Waypoints | 5, 000 |
| Routes | 100 |
| Waterproof Rating | IPX7 |
| Display Resolution | 800 x 480 pixels |
| Transmit Power | 500 W (RMS) |
| Display Size | 5" |
| Sonar Type | CHIRP |
| Frequencies Supported | 77/200 kHz |
| Depth Capability | 750 ft (ClearVü) |
| Transducer | GT20-TM |
| Battery Life | Not applicable |
| Operating Temperature | From -15° to 55°C (from 5° to 131°F) |
| Storage Temperature | -20°C to 70°C |
| Dimensions | 5": 18.8 x 11.6 x 5.4 cm |
| Weight | 5": 0.5 kg |
Guides users on connecting a mobile device to the STRIKER Vivid using the ActiveCaptain app.
Explains how to download and install device software updates using the ActiveCaptain app.
Guides users on setting the correct transducer type for proper sonar function.
Instructions for marking a location as a waypoint directly from a sonar view.
Guides on creating custom depth contour maps of bodies of water.
Steps to connect to the community via the ActiveCaptain app for map sharing.
How to download contour maps shared by other users through the community.
Steps to share your created contour maps with the community.
How to search for saved waypoints, routes, and services by name.
Instructions for marking a location as a waypoint directly on the map.
Steps to select a waypoint and initiate navigation to it.
Guides on creating and following a route using the map interface.
How to save the current GPS position as a waypoint.
Instructions for creating waypoints by coordinates, chart, or range/bearing.
How to mark a MOB location and navigate back to it.
How to create a route with turns and save it.
How to select and follow a saved route.
How to select and follow a saved track.
How to offset depth readings to measure from the keel instead of the transducer.
How to adjust water temperature readings for accuracy.
Configures alarms for arrival, anchor drag, and off-course conditions.
Configures alarms for shallow water, deep water, water temperature, and fish detection.
Resets all device settings to their original factory defaults.
Guides on connecting compatible Garmin devices to share user data.
Provides solutions for common device issues.
Steps to resolve issues with incorrect time display.
Crucial safety warnings and precautions for equipment installation.
Guidelines for selecting the optimal location for transducer mounting on the boat.
Steps for attaching the transducer to its transom mount bracket.
Detailed instructions for mounting the transducer bracket on the transom.
Procedures for checking the transducer installation for leaks and proper function.
Specific tests to verify the transom-mount transducer installation.
Guides on securing the transducer and routing its cable for trolling motor mounting.
Information on updating the device software, including loading onto a memory card.
Steps to perform the software update process on the device.
Critical safety warnings for operating the vessel while using the device.
To Next Page