Need help?Do you have a question about the Garmin 350C and is the answer not in the manual?
General| Brand | Garmin |
|---|---|
| Model | 350C |
| Category | Fish Finder |
| Language | English |
Explains how to use the device's physical buttons for navigation and control functions.
Instructions on how to navigate between different screens and pages on the device.
Guide on inputting numbers for settings like alarms or offsets.
Describes the primary sonar display showing a full graph of sonar readings from a transducer.
Explains how to enable the A-Scope feature for enhanced sonar data visibility.
Details the split-zoom view for magnified sonar data alongside the full view.
Describes the circular flasher display for vertical fishing and sonar return interpretation.
Explains the dual-frequency sonar view with separate displays for 77 kHz and 200 kHz.
Instructions for accessing logged depth and temperature data.
How to configure duration and scale for viewing logged sonar data.
Accessing the page displaying odometer and speed data.
Procedure to reset the device's odometer to its starting value.
General guidance on configuring different sonar display types.
Steps to manually control sonar sensitivity and detail level.
How to use automatic gain settings for optimal sonar sensitivity.
Guide to manually adjust the depth scale displayed on sonar views.
How to set the sonar depth range to automatic adjustment.
Instructions for manually zooming into specific sonar view areas.
How to activate automatic zoom adjustments for sonar views.
How to lock the sonar zoom to the bottom for a stable view.
Steps to display and modify a horizontal depth line on sonar views.
Method to temporarily stop and review sonar display.
Accessing past sonar data for review and analysis.
How to restart sonar display after pausing or viewing history.
Configuration of various audible alerts for vessel conditions and targets.
Explains different color palettes for sonar display visibility.
Adjusting the size and visibility of numbers on sonar views.
Configuring system-wide options like language.
Sets background for daytime or nighttime viewing.
Adjusts the brightness of the device screen.
Controls when the device emits audible beeps.
Allows the device to turn on automatically when power is applied.
Displays the Unit ID and other device information.
Configures measurement units for depth, temperature, speed, and distance.
Calibrates depth readings based on transducer location relative to the keel.
Compensates temperature readings for accuracy.
Procedure to calibrate the water speed sensor for accurate readings.
Resets all user-entered settings to their default factory values.
Instructions for cleaning the device's exterior safely.
Instructions for cleaning the anti-reflective screen safely.
Guidance on how to register the device for better support.
Information on how to get in-country support.
Terms and conditions for using the device's embedded software.
Critical warnings regarding operation, battery, and warranty.
Details the product's warranty coverage and limitations.
Warranty eligibility for products bought through online auctions.
Warranty conditions for devices purchased internationally.
Consumer guarantees and rights for Australian customers.
To Next Page