Time Zones
Each time you turn on the watch and acquire satellites or sync with your phone, the watch automatically detects
your time zone and the current time of day.
Setting an Alarm
You can set multiple alarms. You can set each alarm to occur once or to repeat regularly.
1 Hold .
2 Select Clocks > Alarms > Add Alarm.
3 Enter a time.
4 Select the alarm.
5 Select Repeat, and select an option.
6 Select Sounds, and select an option.
7 Select Label, and select a description for the alarm.
Deleting an Alarm
1 Hold .
2 Select Clocks > Alarms.
3 Select an alarm, and select Delete.
Starting the Countdown Timer
1 Hold .
2 Select Clocks > Timer.
3 Enter the time, and select .
4 Press .
Using the Stopwatch
1 Hold .
2 Select Clocks > Stopwatch.
3 Press to start the timer.
4 Press to restart the lap timer.
The total stopwatch time continues running.
5 Press to stop the timer.
6 Select an option:
• To reset the timer, swipe down.
• To save the stopwatch time as an activity, swipe up, and select Save.
• To review the lap timers, swipe up, and select Review Laps.
• To exit the stopwatch, swipe up, and select Done.
Sound Settings
Hold , and select > System > Sounds.
Volume: Sets the volume for music, system tones, notification tones, and alarm tones. You can also silence all
sounds.
System Tones: Turns the system tones on, off, or on only during an activity.
Ringtone: Turns the ringtone on or off.
Button Tones: Turns the button tones on or off.
Customizing Your Watch 51
To Next Page