11.7.6 Place unit in upright position at selected operating location.
CAUTION:
Adjust the width of the unit at the bottom of the panels to 30” (762mm) BEFORE making the holes
in the next step.
11.7.7 Secure the unit to the floor using 1/4” (6mm) mounting screws (not supplied). The mounting holes in
the plates may be used as a drill guide.
11.8 ELECTRICAL WIRING REQUIREMENTS
Magnascanner MT 5500 # 1167700
Comes with a standard American ground power cord. If the plug must be replaced or removed to hard
wire an AC junction box, use the following wiring list:
Green To Ground
Black To Line Hot
White To Line Neutral
Magnascanner CS 5000 # 1167420 (International)
Comes with a European power cord. If the plug must be replaced or removed to hardwire to an AC
junction box, use the following wiring list:
Green/Yellow To Ground
Brown To Line Hot
Blue To Line Neutral
MT 5500
User Manual
©2006 GARRETT METAL DETECTORS 45 PN 1530200.F.0506
To Next Page
Loading...
