To Next PageTo Next Page
Need help?Do you have a question about the Gasboy 9852AXTW1 and is the answer not in the manual?
Provides a wiring diagram for 115VAC/60 cycle pump configurations.
Provides a wiring diagram for 115VAC/60 cycle dispenser configurations.
Provides a wiring diagram for 230VAC/50 cycle pump configurations.
Describes the function and specifications of the CPU PCB for the GASBOY Series 9800A.
Explains the configuration options available through the CPU PCB's SW switches.
Configures RS-485 address and pulser output rates for external systems.
Describes the RS-485 Interface PCB, its function, and protection features.
Describes the functions of the power supply PCB, including voltage regulation and battery backup.
Describes the function of pump relays in controlling motors and their CPU PCB control.
Troubleshoots issues where the 9800A is dead, displays are blank, or activation fails.
Troubleshoots problems with 9800A activation failure in standalone mode.
Troubleshoots activation failures when the 9800A is connected to a CFN system.
Troubleshoots communication issues between the 9800A and the GASBOY CFN system.
Troubleshoots issues where the 9800A resets but the pump fails to dispense fuel.
Troubleshoots issues where the 9800A resets but the dispenser fails to dispense fuel.
Troubleshoots scenarios where fuel is dispensed but no quantity is shown on the display.
Addresses issues where 9800A displays quantity but the fuel management system records incorrectly.
Troubleshoots problems with last transaction display during power failure and electronic totalizer data.
Troubleshoots display error code 01, indicating a RAM failure on the CPU PCB.
Troubleshoots display error code 02, indicating a ROM failure on the CPU PCB.
Troubleshoots standalone mode error code 55, indicating a power failure.
Troubleshoots standalone mode error code 56, related to pulser or CPU PCB problems.
Provides general safety warnings and procedural understanding for replacement tasks.
Provides step-by-step instructions for removing and replacing the platform assembly.
Provides detailed steps for replacing the CPU PCB on the 9800A.
Provides detailed steps for replacing the LCD Display PCB.
Provides detailed steps for replacing the Power Supply PCB.
Provides steps for replacing the RS-485 or Pump Interface PCB.
General| Product Name | Gasboy 9852AXTW1 |
|---|---|
| Category | Dispenser |
| Model | 9852AXTW1 |
| Manufacturer | Gasboy |
| Type | Fuel Dispenser |
| Hose Length | 10 ft |
| Nozzle Type | Automatic Shut-off |
| Display | LCD |
| Power Supply | 120V AC |
