Gasboy Atlas 9800 - User Manual

MDE-4652F Atlas® 9800 Electronics Field Installation Instructions · September 2019 Page 1
Introduction
Purpose
This manual provides instructions for installing the Atlas
®
9800 Electronics.
Intended Users
This manual is intended for Gasboy
®
-trained and certified Authorized Service Contractors
(ASCs).
Table of Contents
Topic Page
Introduction 1
Important Safety Information 3
Atlas 9800 Parts 5
Accessing Electronic Components 9
Installing Atlas 9800 Power Supply Assembly (M15579A001) 10
Installing Atlas 9800 CPU Board (M06333KXXXX) 12
Installing Atlas 9800 Pulse-out I/F with EM Totalizer Drive Boar
d (M06587A001) 18
Loading New CPU Software 20
Required Tools
A Phillips
®
screwdriver is required for installing the Atlas 9800 Electronics.
Parts List
The following table lists the parts required for installing the Atlas 9800 Electronics:
Item # Description Part Number Quantity
1 Printed Circuit Assembly (PCA)
, Central Processing
Unit (CPU) Board
M06333KXXXX 1
2 Kit, 115 VAC Power Supply to replace C06397 or
M07588
A001
M12421K00X** 1
3 Atlas 9800 Power Supply Assembly M15579A001 1
4 Kit, 230 VAC Power Supply to replace C06489 or
M07588
A003
M12422K00X** 1
MDE-4652F
Atlas
®
9800 Electronics Field Installation Instructions
September 2019

Summary

Introduction to Atlas 9800 Electronics Installation

Purpose of Installation Manual

Provides instructions for installing the Atlas® 9800 Electronics.

Intended Users of Manual

For Gasboy®-trained and certified Authorized Service Contractors (ASCs).

Required Tools for Installation

Phillips Screwdriver

A Phillips® screwdriver is required for installing the Atlas 9800 Electronics.

Parts List Overview

Important Safety Information

General Safety Precautions

Covers hazards and safety precautions for installation, inspection, maintenance, and servicing.

Emergency Electrical Shut-Off Procedures

Details emergency stop procedures and total electrical shut-off requirements.

Work Area Safety and Regulations

Covers evacuating areas, barricading, following regulations, and using genuine parts.

Warning Symbols and Signal Words

Explains safety alert symbols and signal words (DANGER, WARNING, CAUTION) for hazard levels.

Fuel and Electrical Hazards

Addresses explosion and fire risks from fuels and electrical energy.

Additional Safety Information

Fire, Spark, and Static Hazards

Warns against open flames, sparks, and static electricity igniting fuel vapors.

Safe Working Practices

Covers working alone safely, electrical safety, and hazardous materials handling.

Emergency Response and Lockout;Tagout

Details emergency information reporting and Lockout/Tagout procedures.

Atlas 9800 CPU Board (M06333 KXXXX)

Atlas 9800 Power Supply Assembly (M15579 A001)

Atlas 9800 Serial EEPROM Board (M06656 K00 X)

Atlas 9800 Pulse-out I;F Board with EM Totalizer Drive (M06587 A001)

Accessing Electronic Components

K-Pump RS-485 with Totalizer (M06725 A001) Features

Features of the K-Pump RS-485 with Totalizer board.

Installing Atlas 9800 Power Supply Assembly (M15579 A001)

Installing Atlas 9800 CPU Board (M06333 KXXXX)

CPU Board Jumper and Switch Configuration

Details on configuring the CPU board using jumpers (JP1-JP9) and switches (SW2).

Installing Atlas 9800 Pulse-out I;F Board with EM Totalizer Drive (M06587 A001)

Pulse-out I;F Board Jumper Settings

Jumper settings (JP1, JP2, JP3) for different configurations of the Pulse-out I/F board.

Pulse-out I;F Board JP4 and JP5 Settings

JP4 and JP5 jumper settings for A, Q, and K models on the Pulse-out I/F board.

Loading New CPU Software

Gasboy Atlas 9800 Specifications

General

Brand	Gasboy
Model	Atlas 9800
Category	Dispenser
Language	English