To Next Page

To Previous Page

BEFORE FIRST USE

WARNING – Always ensure that children do not play with the appliance

or any part of it or the packaging! Do not leave children younger than 8 years

unattended, when the appliance, any part of it, or the packaging is in their reach.

WARNING - RISK OF BURNS! – During operation, some parts of

the appliance get very hot. Additionally, the appliance is designed for giving off

hot water and hot steam under high pressure. Before operation, always ensure to

assemble the appliance completely and correctly. Always ensure to switch OFF the

appliance (pressing the ON/OFF button; the display gets dark), unplug and wait

until the appliance cooled down, before moving or cleaning the appliance and

when the appliance is not in use.

WARNING - RISK OF ELECTRIC SHOCK! – Do not pour or spill

any liquids on or under the appliance. Do not place or immerse the appliance in

any liquids. Always keep the grinder completely dry to avoid damage. Ensure that

the bean hopper is completely dry, before installing the bean hopper at the grin-

der. Do not place clothes or similar materials on or under the appliance during

operation. If any liquid has been spilled on the appliance or ran into the housing,

immediately unplug the appliance, and clean the appliance according to the

instructions in chapter ‘Care and Cleaning’. Always empty the drip tray and water

tank before moving the appliance (see: ‘Operation’).

1. Pull the appliance and all parts out of the shipping box. Remove and discard all

promotional labels, stickers, and packaging materials attached to your espresso

machine, but do not remove the model label and serial number at the bottom of

the appliance.

2. Before discarding the packaging, ensure that you have found all parts and

accessories. See: ‘Knowing Your Espresso Machine’.

3. Clean all removable parts (water tank, portafilter, filter baskets, drip tray with

metal grid, bean hopper, and hopper lid, accessories) in warm dishwater.

Wipe the housing via a soft, slightly damp cloth (see: ‘Care and Cleaning’).

Carefully dry all parts and the housing.

4. After cleaning, place the appliance on an appropriate working place near a

suitable wall power outlet (see: ‘Important Safeguards’).

5. Install the bean hopper.

Gastroback 42616 User Manual

Questions and Answers: