51
• Do not leave the appliance unattended while connected to the
power supply. Always hold the housing at both sides near the bottom
for moving the appliance. Do not hold the appliance at the group
head, water tank, drip tray, or power cord for moving the appli-
ance.
• Keep the appliance and its parts and accessories clean. Clean the
appliance according to the instructions in chapter ‘Care and Clea-
ning’. Do not use any abrasive cleaners, cleaning pads (e.g. metal
scouring pads), or any corrosive cleaners (e.g. disinfectants, chemical
bleach, unsuited descaling solutions). Do not use any hard or sharp-
edged objects for operating or cleaning the appliance.
• Do not place the appliance or any of its parts or accessories in an
automatic dishwasher.
• Always clean the appliance in accordance to the instructions in chap-
ter ‘Care and Cleaning’.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
The appliance is driven and heated electrically. Place the appliance near
a suitable wall power outlet to connect the appliance directly to a pro-
tected mains power supply with protective conductor (earth/ground) con-
nected properly. Ensure that the voltage rating of your mains power supply
corresponds to the voltage requirements of the appliance (220 - 240 V,
50/60 Hz, AC, rated for at least 10 A).
The installation of a residual current operated circuit breaker (r.c.c.d.) with
a maximum rated residual operating current of 30 mA in the supplying
electrical circuit is strongly recommended. If in doubt, contact your electri-
cian for further information.
• In various foreign countries, the specifications for power supplies are
subject to incompatible norms. Therefore it is possible that power sup-
plies in foreign countries do not meet the requirements for safe opera-
tion of the appliance. Thus, before operating the appliance abroad,
ensure that safe operation is possible.
• Do not use any desk top multi socket outlet, external switching device,
To Next Page
Loading...
Need help?
General
