82
clean and dry. Do not place any hard or heavy objects on or in the appliance or
any part of it.
The power cord may not be knotted, squeezed or bent. Do not pull or strain the
power cord.
1. Turn the selection dial to the vertical position, switch OFF (press the POWER but-
ton), unplug, and leave the appliance cool down completely (at least 1 hour).
2. Clean the appliance and all parts and accessories (see: ‘Care and Cleaning’),
performing the described cleaning procedures, to avoid that residues will dry
on the inner parts of the appliance. We recommend to descale the appliance
before storage (see: ‘Descaling the Appliance’).
3. Empty the water tank and drip tray completely. Then wipe dry. Thereafter, insert
these parts back into position.
4. Grasp the appliance at both sides at the bottom of the housing, and place the
appliance on a suitable surface, where it cannot fall.
5. Lay the power cord loosely around the appliance. Store the parts and accesso-
ries with the appliance.
IMPORTANT: Do not use any parts or accessories of the appliance for any other
purpose than operating the appliance.
NOTES FOR DISPOSAL
Dispose of the appliance and packaging must be effected in accordance
with the corresponding local regulations and requirements for electrical
appliances and packaging. Please contact your local disposal company.
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for information regarding
the collection systems available. If electrical appliances are disposed of in landfills,
dumps, or refuse incineration, hazardous substances can leak into the groundwater or
can be emitted into air, thus getting into the food chain, and damaging your health
and well-being as well as poisoning flora and fauna. When replacing old appli-
ances with new once, the vendor is legally obligated to take back your old appliance
for disposal at least for free of charge.
To Next Page
Loading...
Need help?
General
