Gate Titan Quick Start Guide

43 Programming via Trigger
Activating Safe mode if not assigned
If Safe mode is not assigned in the GCS app, it is possible to activate it
via selector*:
1. Switch selector fast in sequence: SAFE à SEMI à SAFE
(SAFE à AUTO à SAFE for AK-47 selector type)
2. Now Safe mode is activated – switch to SEMI or AUTO to deactivate it
3. Switching to SAFE again evokes re mode assigned to SAFE position
in GCS app
* Safe mode also applies when selector is on SAFE while connecting the battery – switching to
SEMI or AUTO deactivates it.
watch the video

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes