Gate WARFET - Setting Up with Tactical Programming Card; Navigating Settings and Reading Displays

Example 2. The glows. Check only on the red display.RED ICON
Example 1. The glows. Check only on the blue display.BLUE ICON
4. Click and hold button NEXT to watch DEMO.
5. Click button NEXT to switch between functions and displays.
6. Click buttons LEFT or RIGHT to switch options.
7. Click and hold buttons LEFT or RIGHT to switch options more quickly.
8. Before firing, disconnect the Programming Card and connect the WARFET
Power Module to the battery.
9. All the settings are saved automatically.
10. Click and hold buttons LEFT and RIGHT to load default settings.
How to read settings? Take a look at the examples below:
50 60 70 80 90 100
SHORT LONG
BURST
TIME
STOCK WIRING MODIFIED WIRING
OFF TRIGGER AUTO
PRE-COCKING
BATTERY PROTECTION
ROF CONTROL
PRE-COCKING
BOOST
ACTIVE BRAKE
SMART TRIGGER
DARK MODE
OFF ON OFF ONOFF ON
7.4V 11.1V 14.8V 9.9V 13.2VOFF
LESS MORE
SEMI
AUTO
SEMI
BURST
BURST
AUTO
SEMI
AUTO
SEMI
BURST
50 60 70 80 90 100
SHORT LONG
BURST
TIME
OFF TRIGGER AUTO
PRE-COCKING
BATTERY PROTECTION
ROF CONTROL
PRE-COCKING
BOOST
ACTIVE BRAKE
SMART TRIGGER
DARK MODE
OFF ON OFF ONOFF ON
7.4V 11.1V 14.8V 9.9V 13.2VOFF
LESS MORE
SEMI
AUTO
SEMI
BURST
BURST
AUTO
SEMI
AUTO
SEMI
BURST
PRE-COCKING
BOOST maximum
value
BLUE ICON on
DARK MODE - OFF
RED ICON on
BURST TIME
minimum value
corresponding
LED
STOCK WIRING
SEMI/AUTO
Fig 5.
Fig 6.
STOCK WIRING MODIFIED WIRING
19
WWW.GATEE.EU
USER GUIDE
WARFET
OFF
OFF
OFF
OFF
7.4
100%
SEMI/AUTO
PRE-COCKING
ACTIVE BRAKE
SMART TRIGGER
DARK MODE
BATTERY PROTECTION
ROF CONTROL
STOCK WIRING
maximum value
minimum value
PRE-COCKING BOOST
BURST TIME