Need help?Do you have a question about the Gate MERF 3.2 and is the answer not in the manual?
General| Brand | Gate |
|---|---|
| Model | MERF 3.2 |
| Category | Controller |
| Language | English |
Caution advised for battery short-circuiting due to potentially dangerous consequences.
Recommends professional installation by experienced airsoft technicians for product safety.
Directs battery energy to motor, bypasses contacts, increases ROF, protects contacts.
Stops piston in front position in SEMI mode, increases gearbox life, adds realism.
Provides thermal protection, works with time-lag fuse for AEG protection.
Prevents over-discharge of LiPoly batteries, monitors voltage, stops firing at critical level.
Ensures compatibility with micro-switches, resistant to contact bounce, improves ROF.
Standard AEG installation requiring no modification to the airsoft gun.
Adaptation of standard AEG installation to work with MERF 3.2, requiring access to trigger contacts.
Activate Programming Mode for simple installation by pressing the button quickly.
Activate Programming Mode for enhanced installation by disconnecting motor and pressing button/trigger.
Activate Programming Mode for incorrect configuration by connecting battery while button is pressed.
Configure battery settings, including voltage and type, for optimal performance.
Adjust the Rate of Fire (ROF) settings to control the firing rate of the AEG.
Enable or disable the Smart Trigger function for faster trigger response.
Set approximate burst times for three-shot series, adjustable in 4ms or 8ms increments.
Fine-tune burst times with precise increments for accurate shot series.
Select between Enhanced and Simple modes for different AEG installation types.
Explains burst time as milliseconds for three shots and its relation to Rate of Fire.
Details methods for setting burst time by hearing or measuring the rate of fire.
To Next Page
