Gate MERF 3.2 - 03. Set Up Your MERF 3.2

03. Set up your MERF 3.2
Step 2. Automatic display test. LEDs light up for a second.
4 LED DISPLAY
ALL ON
Step 3. Automatic software version check. Two LEDs light up for a second.
4 LED DISPLAY
4 LED DISPLAY
Step 1. Connect the battery and the programming button to MERF 3.2
FUSE
4 LED DISPLAY
ALL OFF
BATTERY
7.2 - 12.8V
BATTERY
7.2 - 12.8V
BATTERY
7.2 - 12.8V
USER GUIDE
12
WWW.GATEE.EU
FUSE
FUSE