Gate MERF 3.2 User Manual

You can connect the system to a rifle in two ways. Depending on the
selected method, you should set a proper operating mode: Plug&Play
or Enhanced
Plug&Play: All you need to do is connect the system between
the battery and the rifle.
Enhanced Mode: It requires modification of AEG installation.
Connect trigger contacts to MERF 3.2. You can do it using the
signal wire attached to the kit.
Operating Modes
The function gives you the option to program your fire selector.
There are five modes:
- STOCK WIRING SEMI/AUTO
- STOCK WIRING SEMI/BURST
- MODIFIED WIRING SEMI/AUTO
- MODIFIED WIRING SEMI/BURST
- MODIFIED WIRING BURST/AUTO
USER GUIDE
08
WWW.GATEE.EU

Gate MERF 3.2 Specifications

General

Brand	Gate
Model	MERF 3.2
Category	Controller
Language	English