05. Pre-cocking boost adjustment
PLEASE NOTE!
Making changes in Active Brake, Smart Trigger, ROF Control or BURST TIME settings might
result in necessity of re-adjustment of Pre-cocking Boost. Therefore, Pre-cocking Boost
settings should be exercised as the last step of WARFET configuration.
Instructions:
1. Switch ccording to
Card usage” (p.18).
Pre-cocking to Trigger mode a ”04. Tactical Programming
2. onnect WARFET to your AEG according to
. Switch your AEG fire selector to SEMI mode.
Pull the trigger two times. T
C ”02. Plug & Play Installation” (p.14)
or ”03. Hardwired Installation” (p.16)
he first trigger action fires a shot, and the second trigger
action should compress the spring.
a) if the second trigger action fires a shot instead compressing the spring, it means
that Pre-cocking Boost value is too large. Go to Pre-cocking Boost settings and
reduce boost value.
OFF TRIGGER AUTO
PRE-COCKING
LOAD DEFAULT
PRE-COCKING
BOOST
LESS MORE
Click BUTTON LEFT to reduce Boost
LED is blinking
NOTE: Pre-cocking Boost has 36 positions.
to switch between them more quickly.
Click and hold buttons LEFT or RIGHT
USER GUIDE
20
WWW.GATEE.EU
WARFET
To Next Page
Loading...
