Gates GC32-XD - Safety and Warnings; General Safety Precautions

Gates Corporation
GC32-XD OPERATOR’S MANUAL
Prod. No.: 7480-7001
Part No.: 78828
Crimper Specifications:
Power source: Any world-wide electrical source 208-264V, 45-65 hz, 1 or 3
phase and 20 Amps
Dimensions: 27" H x 23" W x 19 ½" D
Approx. Weight: 660 lbs.
Maximum Rated Working Pressure: 4351 psi (300 bar)
Stand Dimensions: (Adjustable Height) 25 ½" H x 31 ¾" W x 16 ½" D
Carefully read and understand the following warnings before operating this crimper.
An incorrect hose assembly can rupture or blow apart in use, resulting in serious injury, death, or
property damage. REMEMBER: Others depend on you to make correct assemblies.
FOR SAFETY'S SAKE USE THIS MACHINE ONLY IF YOU:
1. Receive hands-on TRAINING with this Gates crimper and assemblies.
2. Follow current GATES OPERATING MANUAL and CRIMP DATA for the GC32-XD crimper.
3. Use only NEW (UNUSED GATES) hose and fittings.
4. Wear SAFETY GLASSES.
5. Keep hands clear of moving parts.
NOTE:
Gates recommends only those hose and coupling combinations specified in the Gates Hydraulic
Product catalogs. Gates disclaims any liability for any hose assemblies which have not been produced
in conformance with Gates assembly recommendations.
!
WARNING
WARNING