Gateway 13-inch - Page 38

34
Chapter 3: Adjusting Your LCD TV Settings
www.gateway.com
4 Use the number pad to enter your password when prompted. If you have
not set a password, enter 0000. If you have forgotten your password, enter
0117.
5 Press the and buttons to select the SET CODE sub-menu, then press
the button to change the settings.
6 Use the number button pad to enter a new four-digit password when
prompted.
7 Use the number button pad to re-enter the new four-digit password when
prompted.
8 Press EXIT to close the OSD.
ENTER CODE
- - - -
ENTER CODE
- - - -
REPEAT CODE
- - - -