38
Replacing Gateway 400VTX Components
www.gateway.com
Replacing the LED indicator panel
Tools you need to complete this task:
Screws removed during this task:
To replace the LED indicator panel:
1 Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in “Preparing your notebook”
on page 7.
2 Turn your notebook over so the bottom is facing up.
3 Remove the battery by following the instructions in “Removing the
battery” on page 8.
4 Turn your notebook over so the top is facing up.
5 Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 25.
6 Remove the keyboard by following the instructions in “Replacing the
keyboard” on page 28.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
4 chrome 2.5 × 3.0 mm
(keyboard)
1 chrome 2.0 × 3.0 mm
(LED indicator panel)
2 black 2.5 × 4.0 mm
(LED indicator panel)
To Next Page
Loading...
