43
Replacing the hinge covers
www.gateway.com
Replacing the hinge covers
Tools you need to complete this task:
To replace the hinge covers:
1 Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in “Preparing your notebook”
on page 7.
2 Turn your notebook over so the bottom is facing up.
3 Remove the battery by following the instructions in “Removing the
battery” on page 8.
4 Turn your notebook over so the top is facing up.
5 Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 25.
6 Open the LCD panel all the way, so it lies flat on the table.
Flat-blade driver Scribe or non-marring tool- OR -
To Next Page
Loading...
