61
Replacing the diskette drive kit
www.gateway.com
Screws removed during this task:
To replace the diskette drive kit:
1 Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in “Preparing your notebook”
on page 7.
2 Turn your notebook over so the bottom is facing up.
4 chrome 2.5 × 3.0 mm
(keyboard)
2 chrome 2.5 × 4.7 mm
(hard drive kit)
4 chrome 2.0 × 3.0 mm
(cooling assembly)
1 chrome 2.0 × 3.0 mm
(LED indicator panel)
2 black 2.5 × 4.0 mm
(LED indicator panel)
12 chrome 2.5 × 5.0 mm
(palm rest bottom)
3 black 2.5 × 4.0 mm
(palm rest top)
3 black 2.5 × 4.0 mm
(diskette drive kit)
3 chrome 2.5 × 3.0 mm
(diskette drive kit bracket)
To Next Page
Loading...
