Gateway FPD 1500 - Page 7

- 7 -
ⓒ
ⓐ
ⓐ
ⓑ
ⓐ
5. INVERTER, POWER, CONTROL PCB
AND MAIN FRAME REMOVAL
①Remove two screws ⓐ.
②Disconnect CN1 and CN2.
③Remove Inverter PCB.
④Remove two screws ⓑ.
⑤Remove the Power and the CONTROL PCB.
⑥Remove four screws ⓒ.
⑦Remove the Front Cabinet.
6. BACKLIGHT REMOVAL
①Remove two screws ⓐ.
②Remove two Sponge Tapes.
③Remove the Backlight from the LCD Module.
ⓐ
7. LCD MODULE REMOVAL
①Remove four screws ⓐ.
②Divide the LCD Module and the Main Frame.
Bottom (Lower) Backlight Ass’y
Top (Upper) Backlight Ass’y
Front Cabinet
Power PCB
CONTROL PCB
Inverter PCB
LCD Module
LCD Module
Main Frame