Gateway FPD 1500 - Disassembly

DISASSEMBLY
- 6 -
J301
J501
ⓐ
1. TILT/SWIVEL REMOVAL
①Remove four screws ⓐ.
②Remove the Tilt/swivel.
2. BACK COVER REMOVAL
①Remove four screws ⓐ from the Back Cover.
②Remove the Back Cover.
3. INVERTER CAPS & TOP SHIELD REMOVAL
①Remove five screws ⓐ.
②Remove two Inverter Caps (Upper, Lower).
③Remove the Top Shield.
4. MAIN PCB ASSEMBLY REMOVAL
①Remove six screws ⓐ.
②Disconnect J301 and J501 from the Main PCB.
③Remove the PCB Shield.
④Remove five screws ⓑ.
⑤Remove the Main PCB from the PCB Shield.
ⓐ
ⓐ
ⓐ
ⓐ
ⓐ
ⓑ
ⓐ
Inverter Cap (Upper)
Inverter Cap (Lower)
Main PCB
PCB Shield
Back Cover
Top Shield