EasyManua.ls Logo

Gateway NV-53 - Symptom-To-FRU Error Messages; Lcd; Power

Gateway NV-53
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.gateway.com
129
Symptom-to-FRU error messages
LCD
Power
Symptom / Error Action in Sequence
n
The LCD backlight doesn't work.
n
The LCD is too dark.
n
The LCD brightness cannot be adjusted.
n
The LCD contrast cannot be adjusted.
n
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
n
Reconnect the LCD connectors.
n
Test or replace the keyboard (if contrast and brightness function key
doesn't work).
n
Check the LCD inverter ID.
n
Test or replace the LCD cable.
n
Test or replace the LCD inverter.
n
Test or replace the LCD.
n
Test or replace the system board.
n
The LCD screen is unreadable.
n
Missing pels in characters.
n
The screen appears abnormal.
n
The wrong color is displayed.
n
Reconnect the LCD connector.
n
Check the LCD inverter ID.
n
Test or replace the LCD cable.
n
Test or replace the LCD inverter.
n
Test or replace the LCD.
n
Test or replace the system board.
The LCD is displaying extra horizontal or vertical
lines.
n
Check the LCD inverter ID.
n
Test or replace the LCD cable.
n
Test or replace the LCD inverter.
n
Test or replace the LCD.
n
Test or replace the system board.
Symptom / Error Action in Sequence
The notebook shuts down during operation.
n
Test the power source (battery pack and power adapter). See “Testing
the power system” on page 118.
n
Test or replace the battery pack.
n
Test or replace the power adapter.
n
Test or replace the system board.
The notebook doesn’t turn on.
n
Test the power source (battery pack and power adapter). See “Testing
the power system” on page 118.
n
Test or replace the battery pack.
n
Test or replace the power adapter.
n
Test or replace the system board.
The notebook doesn’t turn off.
n
Test the power source (battery pack and power adapter). See “Testing
the power system” on page 118.
n
Press and hold the power button for more than four seconds.
n
Test or replace the system board.
The battery can’t be charged.
n
Test the battery pack. See “Check the battery pack” on page 119.
n
Test or replace the battery pack.
n
Test or replace the system board.

Table of Contents

Related product manuals