235
Using the FlexDock
www.gateway.com
4 With the docking connector pointing down, gently slide the tablet into
the FlexDock until it clicks into place. (Spring tabs on each side secure it
in place.)
5 Turn on the tablet by sliding the power switch, which is found on the right
side of the tablet.
6 Test the screen rotation by turning the tablet in the FlexDock. The
FlexDock will sense the change and automatically adjust the screen.
7 Install the optional equipment you have purchased. We recommend that
you install one item at a time, waiting about two minutes before
connecting the next accessory to ensure successful discovery and
installation.
To Next Page
Loading...