40
Chapter 2: Getting Started
www.gateway.com
Connecting to a wired Ethernet
network
Your tablet PC has a network jack that you can use to connect to a 10/100 wired
Ethernet network.
To connect to a wired Ethernet network:
1 Insert one end of a network cable into the network jack on the ports
side of your tablet PC. For the location of the network jack, see “Ports side”
on page 7 and “Back” on page 229.
2 Insert the other end of the network cable into a network jack. Ask your
network administrator to help you select the correct network jack.
Important Your tablet PC is equipped with built-in wireless Ethernet.
For information about connecting to a wired or wireless
Ethernet network, see “Networking Your Tablet PC” on
page 165.
To Next Page
Loading...