Our policy is one of continue research and development in the quest to improve our products. We therefore reserve the rights to amend information provided in this
document, without notice.
For sales or technical support please contact Irri-Gator Products (Pty) Ltd at: Tel: +27 21 9827561, Fax: +27 21 9814473, E-mail: info@irrigator.co.za
P. O. Box 889, Brackenfell, 7561, Western Cape Province, South Africa
MOUNTING THE RADIO RECEIVER MODULE
Always mount the radio receiver module in clear open air.
Mount the module in the horizontal plain with the window facing downwards as shown in the Figure 1
below.
Figure 1
Mount the receiver module onto a stainless steel receiver bracket using the modules mounting slot as
shown in figure 2 below. Insert an M5 machined screw through the hole provided in the top of the
modules mounting bracket and lock this in place with a machine nut to secure the module.
Figure 2
Mount the receiver module along with its bracket on a solid pole or other suitable solid structure as high
is as practically possible. Refer to Figure 3 below as example.
Figure 3
To Next Page
Need help?
General