GB Instruments Wire-Tracker GET-4110K, LAN-Tracker GET-4220K - Page 3

2
GET-4220K
RJ-11 Plug
Co-axial Plug
Two (2) Alligator Clips
RJ-45 Plug
To access the adapters, open the
back of the transmitter. All five plugs
are contained in individual slots.
During use, the appropriate plug can
be pulled out of the slot, and the
cover closed. The On/Off button is
located on the front of the housing.
To activate the unit, press this button
once. The LED will blink, indicating
that a signal is being transmitted.
The unit can be turned off by
pressing this button again.
To conserve battery life, the unit will
turn itself off after 30 minutes.
GET-4220T
Transmitter
L
A
N
T
R
A
C
K
E
R
M
u
l
t
i
-
P
u
r
p
o
s
e
W
i
r
e
T
r
a
c
k
e
r
PUSH
ON
AUTO
OFF
LAN TRA GET-4220R Rece